Air Cooled Servo Stabilizer

_
Air Cooled Servo Stabilizers offered by us are servo stabilizers that have capability to supply constant voltage to machines. This consistent supply makes them highly demanded use in areas like lifts, hospitals, CNC / VMC / HMC machines, hotels as well as in other industries. Servo stabilizers also come with fully solid state controlled circuits with ± 1% regulation and have no wave-form distortion.
Accessories (Optional)
  • Ultra isolation transformer at output.
  • Bypass arrangement.
  • Phase Sequence Protection.
  • Line noise & Surge Suppressor.
  • Input Out of range protection.
  • EMI/RFI Filter.
  • Non Standard rate of correction.
Technical Specifications
No Capacity 7.5 KVA to 75 KVA
1 Input voltage range 340-480VAC, 360-460VAC, 380-480VAC or AS per Customer Requirement
2 Output Voltage 380V/400V/415V ±1% (As per Customer requirement)
3 Rate Of Correction Up to 75 V/sec
4 Effect of Power Factor Nil
5 Waveform Distortion Nil
6 Response Time 10 msec
7 Duty Cycle 100% continuous
8 Line Frequency 47 to 63 HZ
9 Controlled Type Digital Micro controlled based
10 Efficiency >98%
11 Operating Temperature 0-50° C
12 Nature Of Cooling Air Cooled
13 Cabinet Color Siemens Grey
14 Servo Motor Drive AC Synchronous Type
15 Protections 1. Input High/Low Voltage Cutoff
2. Output high/Low voltage cutoff
3. Overload Cutoff Protection
4. Single Phasing Preventer
5. Short Circuit Protection
Features & Benefits
  • No potentiometer adjustments
  • All parameters can be modified using the keypad in the front panel
  • Set input voltage band
  • Set output voltage
  • Set output voltage sensitivity
  • Output over / under voltage cut-off
  • Input over voltage / under voltage cut-off
  • Over load cut-off
  • Trip time delay adjustments with variable setting
  • Manual and auto start facility
  • Common control card – any capacity
  • Fully micro control function
  • Generator compatibility
  • Both outdoor and indoor models